中文

Product description

Product model

Design & development

  • BAT32G127

    128KB Flash ,OPA,Comparator,DAC,Multiplier,LCD Driver.It is widely used in three meters, measurement, IoT applications, such as water meter, gas meter, heat meter, voltmeter, ammeter, pressure gauge, gas alarm, combustible gas detector, etc.

    Datasheet >

    BAT32G127 series uses the high-performance ARM Cortex-M0®+ 32bit RISC core, which can operate 32MHz, 128KB Flash Memory ,8KB SRAM. This product integrates I2C, SPI and UART standard interfaces, and integrates 12bit A/D converter, 8bit DAC, temperature sensor, comparator and operational amplifier. At the same time, it also has excellent low-power performance, supports two low-power modes of sleep and deep sleep, and is flexible in design. Its operating power consumption is 35uA/ MHz@32MHz In deep sleep mode, the power consumption is only 0.7uA, which is suitable for battery-powered low-power devices.

    Features

    > ARM Cortex M0+ core 

    > Up to 32MHz @1.8V-5.5V 

    > 35uA/MHz @32MHz   

    > Operating voltage: 1.8V-5.5V 

    > Operating temperature: -40℃-105℃ 

    > 128KB Flash > 8KB SRAM 

    > 2.5KB data flash 

    > Up to 60 GPIOs 

    > Hardware multiplier  module 

    > 8 16 Bit timers 

    > 1 interval timer of 15 Bit (low power consumption timer) 

    > 1 WDT 

    > 1 RTC Timer 

    > Enhanced DMA controller 

    > Linkage controller 

    > LCD Controler,support 4COM*42SEG/6COM*40SEG/8COM*38SEG 

    > A/D conversion-up to 26 channels of high-precision 12Bit ADC, 0.71Msps > D /A conversion-8Bit accuracy, support 1 channels 

    > 1 channels OPA. 

    > 2 channel comparator, input source and reference voltage optional 

    > 1 I2C standard interface, 3-6 simple I2C interfaces 

    > 1 SPI standard interface,support 8 bit and 16 bit 

    > 3 UART interfaces, support LIN-Bus 

    > Support ultra-low power consumption working mode – sleep mode/deep sleep mode 

    > 0.7uA @deep sleep mode 

    >  0.9uA @deep sleep mode +32.768kHz +RTC 

    > Comply with relevant standards of IEC/UL 60730 

    > abnormal storage space access error, hardware CRC calibration Inspection, special SFR protection to prevent misoperation 

    > 128-bit unique ID number 

    > Package: LQFP64/LQFP48/QFN40/LQFP32

  • Product model

    Part Number Package Frequency (MHz) Core Temp Voltage Memory Type ROM RAM Data Flash EEPROM GPIO DMA Timer LSE WDT/WWDT RTC UART I²C SPI CAN LIN PWM/EPWM SAR-ADC SAR-ADC-bit SAR-ADC-ch SAR-ADC-speed(Msps) DAC DAC-bit OPA COMP PGA Driver LCD LED Touch Encryption Other Interface
    SAR-ADC-unitSAR-ADC-bitSAR-ADC-chSAR-ADC-speed(Msps)DAC-unitDAC-bit
    BAT32G127GH32FP LQFP32 32 M0+ -40 ~105 1.8~5.5 FLASH 128KB 8KB 2.5KB / 30 24 9 / 1 1 3 6+1 6+1 / 1 7 1 12 9 0.71 1 8 1 2 / /

    Y

    /

    / / /
    BAT32G127GH40NB QFN40 32 M0+ -40 ~105 1.8~5.5 FLASH 128KB 8KB 2.5KB / 38 24 9 / 1 1 3 6+1 6+1 / 1 7 1 12 16 0.71 1 8 1 2 / /

    Y

    /

    / / /
    BAT32G127GH48FA LQFP48 32 M0+ -40 ~105 1.8~5.5 FLASH 128KB 8KB 2.5KB / 44 24 9 / 1 1 3 6+1 6+1 / 1 7 1 12 17 0.71 1 8 1 2 / /

    Y

    /

    / / /
    BAT32G127GH64FB LQFP64 32 M0+ -40 ~105 1.8~5.5 FLASH 128KB 8KB 2.5KB / 60 24 9 / 1 1 3 6+1 6+1 / 1 7 1 12 26 0.71 1 8 1 2 / /

    Y

    /

    / / /

  • Design & development

This site uses cookies. By using our site you agree to our privacy policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise,you agree to the use of cookies.