The CMS6163N is a driver IC which is designed using either a double-N channel VDMOS capacity transistor or bridge circuitry constructed by IGBT. This specified driver IC is of 3-phase mid-voltage grid, which can be implemented by DC-brushed/DC-unbrushed motors.

A CMS6163N is capable of controlling the high-side driver circuitry output(H0) & low-side driver circuitry output(L0) via its input.

Internally, a 200ns dead-time duration has been preset. As when the chip be outputting a dead-time duration exceeded the built-in dead-time duration, the practical dead-time is in fact the addition of the preset dead-time duration by the MCU and the built-in dead-time.

Moreover, the residing VCC, VBS power-down(UVLO) protection prevent the system activating the external power transistor while being in a low-voltage-drive mode.

>  bias voltage when floating: +180V

>  working range of power supply：8~20V

>  built-in VCC & VBS under-voltage-protection: UVLO

>  built-in through-prevention

>  built-in 200ns dead-time duration

>  channel match between high & low ports

>  output & input be in the same phase

>  built-in pull-down resistor inside the input pin

>  input voltage: 3.3V, 5V are logical compatible

>  capable of outputting high-peak leveled current

>  peaking output current:1.2A@12V, up-rising time duration with the load of 3.3nF:40ns

>  peaking input current:1.5A@12V, down-dipping time duration with the load of 3.3nF:35ns