中文
Latest Products
Microcontroller
Name Describe Date
ANT32RV56xx

ANT32RV56xx has built-in 2 operational amplifiers and 2 comparators, 2 programmable gain amplifiers, which can replace off-chip operational amplifiers and comparators for wireless charging and decoding circuits. It can quickly provide effective protection against abnormal situations in system control. The chip has two built-in high-precision 12-bit ADCs, low-speed and high-speed, which can accurately collect voltage, current and temperature signals for system control for different application scenarios; The flexible configuration of enhanced PWM is suitable for half-bridge and full-bridge control, and the fast braking function can effectively protect the entire control system.


2020-11-01

2020-11-01
CMS8S5885

CMS8S5885 series MCU provides 6 channels of enhanced PWM output, up to 18 channels of 12-bit ADC, supports 2 channels of UART, 1 channel of SPI and 1 channel of I2C, comes with buzzer driver, and has a wealth of analog peripherals, which can simplify product peripherals circuit. Industrial standard design, can work at -40℃ to -105℃, and provide TSSOP20, QFN20 package.


2021-12-17
CMS8S588x

CMS8S588x MCU supports internal 48MHz, external 8/16MHz, built-in 5 16-bit timers, LSE_timer, WUT, BRT, high-precision 12-bit ADC up to 30 channels, with 6-channel PWM module, built-in 2 USART modules, Support I2C and SPI modules, with BUZZER and CRC functions.


2021-02-01
Mixed signal SoC
Name Describe Date
BAT32G137

The BAT32G137 series MCU is an ultra-low power series MCU launched by Cmsemicon based on ARM-Cortex M0+, with a main frequency of 48MHz, a working voltage of 2.0V-5.5V, 128KB Flash, 12KB SRAM, 1.5KB Data Flash, and up to 59 GPIO, ADC, PWM, PGA, comparator, UART, SPI, I2C and temperature sensor, support multiple DMA channels.


2020-09-03
CMS32M57xx

CMS32M57xx series MCU is a high-end motor control dedicated chip based on ARM-Cortex M0 core launched by Cmsemicon. The main frequency is up to 64MHz; operating voltage is 2.1V to 5.5V; 64K Flash Memory, 8K SRAM are provided; up to 46 GPIOs; 6-channel enhanced PWM can output complementary PWM with adjustable dead zone, and a unique brake recovery mechanism can achieve wave-by-wave current limiting function; built-in 12-bit low-speed ADC with sampling rate of 100Ksps, built-in 12-bit high-speed ADC with sampling rate of 1.2Msps; built-in 2-channel high-performance operational amplifier, 2-channel analog comparator, 2-channel adjustable programmable gain amplifier; 32-bit hardware divider only needs 6 system clocks; communication interface provides 2 UART, 1 SPI, 1 I2C; built-in high-precision temperature sensor module; industrial-grade standard design, can work at -40℃ To 105℃; Provide IEC60730 safety certification library to help customers easily pass CLASS B certification; Provide SSOP24, LQFP48 and QFN48 standard packages.



2021-07-30
CMS8H5101L

CMS8H5101L is a high-precision measurement SoC launched by Cmsemicon based on the MCS-51 core; the main frequency is up to 48MHz; the operating voltage is 2.5V to 4.4V; it provides 64K Flash Memory, 1K Data Flash, 4K SRAM; up to 40 GPIOs; built-in 22-bit SigmaDelta ADC, support 1 differential input, PGA magnification can be 1, 2, 4, 8, 16, 32, 64, 128, 256, output rate can be 10Hz, 40Hz, 640Hz; effective resolution up to 18.5 bits, In-band short switch and system chopper switch, integrated temperature sensor; built-in LCD driver, support up to 6 COM*32SEG; built-in LED driver, support up to 6 COM*24SEG; built-in 1.2V reference voltage, which can power high-precision sensors; Built-in 17 channels 12-bit ADC, reference voltage can be selected VDD, 3V, 2.4V, 2V, 1.2V; built-in 2-channel high-performance operational amplifier, 2-channel analog comparator; communication interface provides 4 UART, 1 SPI, 1 I2C; supports 4 timers and a wake-up timer; built-in multiplication and division operation unit, up to 32bit; industrial-grade standard design, can work at -40℃ to 105℃; provide LQFP48 package.


2021-08-31

2021-01-29
BAT32G157

The BAT32G157 series MCU is a Cmsemicon ultra-low power 32-bit microcontroller based on ARM® Cortex®-M0+. It supports up to internal 64MHz, external 20MHz, 256KB Flash, 2.5KB dedicated data Flash memory, 32KB SRAM memory, and up to 58 GPIOs. , Support comparator, USB2.0, ADC, RTC, LCD Bus, I2S, QSPI, IrDA, etc., rich analog functions, timers and various communication interfaces, working voltage 1.8V~5.5V.


2021-02-01
CMS32H3201

CMS32H3201 is a high-precision measurement SoC launched by Cmsemicon based on the high-performance and ultra-low-power Arm® Cortex®-M0+ core; the main frequency is up to 64MHz; the working voltage is 1.8V to 5.5V; it provides 256K Flash Memory, 2.5K Data Flash, and 32KB SRAM; Built-in 24-bit SigmaDelta ADC, support 1 differential input, gain options 1, 2, 4, 8, 16, 32, 64, 128, 256, multiple output rates are available: 2.5Hz~2.56KHz; the effective resolution is the highest Up to 19.2 bits, with in-band short switch and system chopper switch, integrated temperature sensor; built-in high-precision 12-bit ADC rate up to 1.42Msps; integrated programmable PGA, comparator, QSPI, USB, I2S, with multiple IIC UART SPI interface; LCDB BUS (support 8080, 6800 interface), built-in enhanced DMA; hardware divider; industrial standard design, can work at -40℃ to 105℃; provide LQFP64 package.


2021-05-13

2021-06-15
BAT32G139

The BAT32G139 is an MCU series that we designed based on ARM® Cortex®-M0+. It is a 32-bit micro-controller with low power consumption. The maximum operating frequency of this chip is 64MHz, also, it contains 256KB Flash, 2.5KB dedicated Flash storage section, 32KB SRAM storage, 75 GPIO and support the comparator, ADC, RTC, DAC, abundant analogue functions, timer and different kinds of communication ports.

The operating voltage of this chip is ranged within 1.8V~5.5V.



2022-02-10
BAT32G179

The BAT32G179 is a series of 32-bit MCUs we design based on the ARM® Cortex®-M0+. The max clock frequency of this chip is 64MHz. The chip possesses 512KB FLash, 20KB dedicated Flash storage section, 64KB SRAM storage section, 93 GPIOs, comparators, ADC, RTC, LCD bus, abundant analogue functions, timer and different kinds of communication ports.

The operating voltage of this series is ranged within 1.8V~5.5V.


2022-02-10
CMS8H121x

Main frequency is 8MHz/16MHz, voltage is 2.0V to 4.5V, supply 8KB ROM,344B RAM ,128B EEPROM, Built-in 24-bit precision Sigma-Delta ADC, supports 1 differential input with selectable gains of 2 、4 、12 、16 、48、64 、128 、384. Output rate selectable: 10Hz~10.4KHz; Effective resolution up to 20.0 bits, with internal short switch and system chopper switch, PGA pass-through SAR ADC, integrated temperature sensor. Built-in multi-channel 12-bit SAR ADC; Support hardware LED drivers, support up to 8COM x 8 SEG, Supports 1 UART, Support 2  timers, Can work at -40°C to 85°C, provide SOP16 and SSOP24 packages.


2022-06-20
CMS8H5145

Main frequency is 48MHz, voltage is 2.5V to 4.4V, supply 64KB Flash Memory,1K Data Flash ,4K XRAM, Built-in 24-bit high precision Sigma-Delta ADC, supports 2 differential input with selectable gains of 1 、2 、4 、8 、16 、32 、64 、128 、256. Output rate selectable: 5Hz~2.56KHz; Effective resolution up to 20.6 bits, with internal short switch and system chopper switch, integrated temperature sensor, two differential input channels. Built-in multi-channel 12-bit SAR ADC, support hardware LCD driver, and up to 4COM x 33SEG、5COM x 32SEG 、6COM x 31SEG. Support hardware LED driver and up to 4COM x 26SEG、5COM x 25SEG 、6COM x 24SEG. Supports two low offset op amps and two low offset comparators; Supports 6-channel flexibly configurable PWM, support 3 UARTs, 1 SPI, I I2C, 5 timers, support MDU; industrial-grade standard design, Can work at -40°C to 85°C, provide LQFP48 package.


2022-06-21

This site uses cookies. By using our site you agree to our privacy policy. By closing this banner, scrolling this page, clicking a link or continuing to browse otherwise,you agree to the use of cookies.